Product Manual

PAGE 2
•
51180-INS-RD
•
87 7.2 87. 86 3 4
•
NEED ASSISTANCE?
•
CURTMFG.COM
1. Manual Brake Activation:
Activate manual brake control
by pressing and holding the
orange button.
2. Current Brake Level:
The blue ring indicates
current brake output level.
3. Max Output:
The maximum level of
the brake is set by the
'Max Output' setting.
4. Sensitivity Level:
The sensitivity of the
braking power is set by
the 'Sensitivity' setting.
5. Screen Theme:
Select the look of your
screen for day or night.
Note: 'Max Output' and
'Sensitivity Level' are
adjustable in increments of five.
CONFIGURING PROFILE SETTINGS
In your 'Active Profile' screen you can adjust settings.
APPLICATION SETUP
After pairing with the Echo
™
, you will
be directed to the 'Towing Profiles'
screen to setup your trailer's profile. You
can create and save profiles for multiple
vehicles, trailers and load conditions.
Setting configuration is required when
trailer conditions change or the brake
control is being used for a different
trailer or vehicle.
Current Acti ve
Default Profile
Towing Profiles
58 %9:41 AMGS
CONTR OLLER PR OFILES
Towing Profiles Application Profiles


CURRE NT PROFI LE
Controller Profile 2

Controller Profile 3

Alert
s
Active Profile
58 %9:41 AMGS
MAX O UTPUT AGGRE SSIVENES S THEME
Light

0
50 50
+ +- -
BRAKE CO NTROL
Hold Button to Activate
Controller Brakes
WARNING
Avoid Distracted Driving.
Only Use With a Dashboard
Cell Phone Mount.
Touch screen to activate system.
If a communication error occurs between the mobile
application and the brake control, the 'Manual Brake Activation',
'Max Output' and 'Sensitivity Level' setting updates will not take
effect and condition notifications from the brake control will not be
sent. The brake control will continue to function properly
at the most recently programmed settings and braking operation
will not be affected.
Search Select Connect
Continue
58 %9:41 AMGS
Bluetooth Activation
Pairing Successful

Scan for Devices
58 %9:41 AMGS
Get Started
Connect to Controller
via Bluetooth
FOUND DEVICES
Bluetooth 1 Not Connected
Bluetooth 2 Not Connected
Bluetooth 3 Not Connected
Bluetooth 4 Not Connected
Bluetooth Activation
58 %9:41 AMGS
Echo Brake Control
Pickup Truck
Portable Speaker
Smar t Home Device
Not Connected
Not Connected
Not Connected
Not Connected
4. Plug the trailer's 7-way connector into the Echo
™
brake control
while parked on a level surface. With the brake control inserted
and the vehicle started, the LED light on the Echo
™
will flash
yellow for five to eight seconds while calibration occurs. Once
the device is calibrated the LED will turn solid green.
INITIAL SETUP FOR BLUETOOTH CONNECTION
(
CONTINUED FROM PAGE 1
)
2. Enable Bluetooth in your mobile device settings.
3. Launch the app and scan for the Echo
™
. Once the 'Echo
™
Brake Control' is visible, select it. You will then be prompted
to enter the six-digit PIN, found under the cap of the brake
control unit or on the provided quick reference card. Once
pairing is complete, the LED light will be solid blue.
• If the calibration takes longer than eight seconds remove
and reinsert Echo into the vehicle's 7-way socket.
• If the LED does not light up, the 7-way may not have +12V power.
Refer to the 'Vehicle-Specific Requirements' on page one and the
'Troubleshooting Guide' on page four of this manual.
WARNING
WARNING
Avoid distracted driving.
Only make adjustments when the
vehicle is stationary.
Aler
ts
Active Profile
58 %9:41 AMGS
MAX OUTPUT AGGRESSIVENESS THEME
Light

0
50 50
+ +- -
BRAKE CONTROL
Hold Button to Activate
Controller Brakes
1
2
3 4 5
SENSITIVIT Y
Hold Button to
Activate Trailer Brakes