Product Manual

E16 / Q16 WEDGE KIT

WARNING: NEVER EXCEED YOUR VEHICLE MANUFACTURER'S RECOMMENDED TOWING CAPACITY

INSTALLATION INSTRUCTIONS

16992 PARTS LIST

16991 PARTS LIST

Item# Qty Description

1 1 Q16 wedge weldment

2 2 Hex bolt

3 2 Helical lock washer, 5/8"

Item# Qty Description

1 1 E16 wedge weldment

2 2 Hex bolt

3 2 Helical lock washer, 5/8"

Figure 2

Figure 1

PAGE 1 • 1.800.798.0813 • NEED ASSISTANCE? • CURTMFG.COM

PAGE 1
INSTALLATION INSTRUCTIONS WARNING: NEVER EXCEED YOUR VEHICLE MANUFACTURER'S RECOMMENDED TOWING CAPACITY E16 / Q16 WEDGE KIT 16992 PARTS LIST 16991 PARTS LIST Item# Qty Description Item# Qty Description 1 1 E16 wedge weldment 1 1 Q16 wedge weldment 2 2 Hex bolt 2 2 Hex bolt 3 2 Helical lock washer, 5/8" 3 2 Helical lock washer, 5/8" 1 1 2 2 3 3 Figure 2 Figure 1 PAGE 1 • 1.800.798.0813 • NEED ASSISTANCE? • CURTMFG.
PAGE 2
ASSEMBLY Step 1 Attach appropriate wedge (#1) to pin box using 5/8" bolts (#2) and washers (#3). Tighten until lock washer begins to engage. Step 2 Apply grease to both sides of the wedge and skid plate. Step 3 Couple the trailer following the owners manual for the 5th wheel hitch and pin box. Note: 5th wheel hitch and pin box shown for reference only. See figures, 1 and 2. Step 4 Tap wedge with a rubber mallet into skid plate as much as possible. Tighten one or both bolts if accessible.