Product Manual

ManualsBrandsCurt Manufacturing Manuals5th Wheel HitchesCURT Custom 5th Wheel Brackets — For Fits 2005-2010 Ford F-250 Super-Duty, 2005-2010 Ford F-350 Super-Duty, 2008-2010 Ford F-450 Super-Duty Trucks

1/28/2012

***DO NOT EXCEED VEHICLE MANUFACTURER'S RECOMMENDED TOWING CAPACITY.***

Curt Manufacturing Inc., warrants this product to be free of defects in material and/or workmanship at the time of retail purchase by the original purchaser. If the product is found to be defective,

Curt Manufacturing Inc., may repair or replace the product, at their option, when the product is returned, prepaid, with proof of purchase. Alteration to, misuse of, or improper installation of

this product voids the warranty. Curt Manufacturing Inc.'s liability is limited to repair or replacement of products found to be defective, and specifically excludes liability for incidental or

consequential loss or damage.

16443 FORD SUPER DUTY SHORT AND LONG BOX

Parts List

DESCRIPTION

PART NUMBER

QTY

ITEM

.250" DRIVER SIDE PLATECM-16443-DS

.250" PASSENGER SIDE PLATECM-16443-PS

FISHWIRE TOOL1/2"23

.250 x 1.50 x 2.00" SQUARE HOLE SPACERCM-SP3384

.313" x 1.00 x 2.00" U-SHAPE SPACERCM-SP1368

HEX BOLT1/2 - 13 x 1 1/226

CARRIAGE BOLT1/2-13 x 1 3/410

HEX FLANGE NUT

HFN 1213108

.250 x 1.00 x 3.00" SQUARE HOLE SPACERCM-SP6

.250 x 3.00 x 4.00" SQUARE HOLE SPACERCM-SP28

210

HEX NUT1/2-13211

LOCK WASHER1/2"212

1/2" FLAT WASHER1/2" WASHER213

EXISTING HARDWARE

ON BOTH SIDES

(RE-INSTALL AFTER

5TH WHEEL SUBKIT

INSTALLATION)

5TH WHEEL MOUNTING RAILS

(SOLD SEPERATLY)

FORD SUPER DUTY FULL

SIZE PICK UP TRUCK

PASSENGER SIDE

FRAME RAIL

DRIVER SIDE

FRAME RAIL

DRILL APPLICATION : ______

APPROX. INSTALL TIME: ______

OTHER NOTES:

TEMPORARILY REMOVE BRAKE CABLE HANGERS

FROM DRIVER SIDE FRAME RAIL

YES

60 MIN.

Summary of content (3 pages)

PAGE 1
6443 FORD SUPER DUTY SHORT AND LONG BOX 1/28/2012 ***DO NOT EXCEED VEHICLE MANUFACTURER'S RECOMMENDED TOWING CAPACITY.*** Parts List ITEM 1 QTY 1 PART NUMBER CM-16443-DS DESCRIPTION .250" DRIVER SIDE PLATE 2 1 CM-16443-PS .250" PASSENGER SIDE PLATE 3 2 1/2" FISHWIRE TOOL 4 8 CM-SP33 .250 x 1.50 x 2.00" SQUARE HOLE SPACER 5 8 CM-SP136 .313" x 1.00 x 2.
PAGE 2
16443 FORD SUPER DUTY SHORT AND LONG BOX 12/27/2012 RAIL LOCATION DIAGRAM !IMPORTANT! SYSTEM MAY NOT WORK WITH 2003 AND EARLIER COMPEDITOR PRODUCTS USE HITCH TO LOCATE RAIL DRIVER SIDE FRAME RAIL CAB TAIL GATE 54.094 in SHORT AND LONG BOX PASSENGER SIDE FRAME RAIL CENTER LINE OF HITCH CENTER LINE OF AXLE 2.500 in SHORT AND LONG BOX Curt Manufacturing Inc., warrants this product to be free of defects in material and/or workmanship at the time of retail purchase by the original purchaser.
PAGE 3
16443 FORD SUPER DUTY SHORT AND LONG BOX 12/27/2012 ***DO NOT EXCEED VEHICLE MANUFACTURER'S RECOMMENDED TOWING CAPACITY.*** !WARNING! - Do not install mounting rails over plastic bed liners. Plastic bed liners must be cut out of the way to provide metal to metal contact. Base rails may be installed on spray in liners. - Use only bolts, nuts, and washers supplied to install this kit. All bolts are grade 5 and nuts are grade 5 unless specified otherwise.