Product Manual

TAIL GATE
C
A
B
TRUCK FRAME
TRUCK FRAME
Curt Manufacturing Inc., warrants this product to be free of defects in material and/or workmanship at the time of retail purchase by the original purchaser. If the product is found to be defective,
Curt Manufacturing Inc., may repair or replace the product, at their option, when the product is returned, prepaid, with proof of purchase. Alteration to, misuse of, or improper installation of
this product voids the warranty. Curt Manufacturing Inc.'s liability is limited to repair or replacement of products found to be defective, and specifically excludes liability for incidental or
consequential loss or damage.
16428
FORD SUPER DUTY
3 OF 3
WARNING:
- Do not install mounting rails over plastic bed liners. Plastic liners must be trimmed for metal to metal contact.
(Mounting rails may be installed on spray on liner.)
- Use only supplied fasteners for installation.
- Before installing mounting rails and hitch, measure to be sure there will be enough clearance between the truck and trailer to allow for turns.
HITCH CENTER LINE
AXLE CENTER LINE
RAIL LOCATION DIAGRAM
!IMPORTANT!
SYSTEM MAY NOT WORK WITH
2003 AND EARLIER COMPETITOR
PRODUCTS
3/16 in (SHORT AND LONG BOX)
51 1/2 in
(SHORT AND LONG BOX)
(FOR REFERENCE ONLY)
ROW 1
ROW 2
ROW 4
ROW 3