Product Manual

Table Of Contents

INSTALLATION WALKTHROUGH:

For more information log onto www.curtmfg.com, & for helpful towing tips log onto www.hitchinfo.com

Parts List

DESCRIPTION

PART NUMBER

QTY

ITEM

CARRIAGE BOLT1/2-13 x 1 1/4

HEX FLANGE NUTHFN 121322

.250 x 1.00 x 3.00" SQUARE HOLE SPACERCM-SP623

1/2" FISHWIRE1_2 FISHWIRE

M10-1.25 x 30 HEX FLANGE BOLTM10 - 1.25 x 30 HFB4

1. Open the rear vehicle doors to expose the bumper cover

and fasteners. Using a T30 torxbit, remove (8) fasteners

and the bumper cover. Note

: If present, disconnect the

rear back-up sensor before completely removing the

bumper cover.

2. Remove (2) M10 bolts and (1) M10 nut securing the

bumper beam to the end of the frame, both sides.

Note

: Remove M10 bolts with a 16mm socket

and M10 nuts using a 15mm socket.



BUMPER COVER

BUMPER BEAM

REAR OF VEHICLE