Product Manual

GROSS LOAD CAPACITY WHEN USED AS A WEIGHT CARRYING HITCH: LBS. TRAILER WEIGHT & LBS. TONGUE WEIGHT.
GROSS LOAD CAPACITY WHEN USED AS A WEIGHT DISTRIBUTION HITCH: LBS. TRAILER WEIGHT & LBS. TONGUE WEIGHT
***DO NOT EXCEED VEHICLE MANUFACTURER'S RECOMMENDED TOWING CAPACITY.***
HAVING INSTALLATION QUESTIONS? CALL TECHNICAL SUPPORT AT 1-800-798-0813
PERIODICALLY CHECK THIS RECEIVER HITCH TO ENSURE THAT ALL FASTENERS
ARE TIGHT AND THAT ALL STRUCTURAL COMPONENTS ARE SOUND.
CURT Manufacturing LLC., warrants this product to be free of defects in material and/or workmanship at the time of retail purchase by the original purchaser.
If the product is found to be defective, CURT Manufacturing LLC., may repair or replace the product, at their option, when the product is returned, prepaid,
with proof of purchase. Alteration to, misuse of, or improper installation of this product voids the warranty. CURT Manufacturing LLC.'s liability is limited to
repair or replacement of products found to be defective, and specifically excludes liability for incidental or consequential loss or damage.
6,000 900
8,000
900
TOYOTA HIGHLANDER
3/14/2018
13200
60
44
30
HITCH WEIGHT:
LBS.
INSTALL TIME
PROFESSIONAL: MINUTES
NOVICE (DIY): MINUTES
INSTALL NOTES:
Scan
for more
information
Parts List
DESCRIPTIONPART NUMBERQTYITEM
HEX BOLT
M12-1.25 x 35mm61
WASHER,CONICAL,TOOTHED,1/2"1/2 CONICAL TOOTHED WASHER62
DRIVER SIDE FRAME RAIL
EXISTING WELDNUTS
(BOTH SIDES)
MUFFLER
(3) EXISTING THREADED
PLASTIC INSERTS
(2) EXISTING RUBBER
PLUGS (BOTH SIDES)
UNDERBODY PANEL
(SHOWN TRIMMED)
REAR FASCIA
EXISTING METAL
FASCIA TAB
EXISTING
TOW LOOP
(2) EXISTING
M12 BOLTS
EXISTING FASCIA SCREW
TOOLS REQUIRED
RATCHET
TORQUE WRENCH
10mm SOCKET
17mm SOCKET
19mm SOCKET
1/2" SOCKET
6" EXTENSION
SCREW DRIVER
ROTARY TOOL (OPTIONAL)
SAFETY GLASSES
1
2
EXISTING M12 BOLT
- NO DRILLING
- PART REMOVAL
- TRIM OR REMOVE
UNDERBODY PANEL
- TRIM FASCIA