Manualshelf

Product Manual

ManualsBrandsCurt Manufacturing ManualsHitch Receivers + AdaptersCurt Custom Fit Class III Receiver Hitch - Fits 2014-2019 Toyota Highlander
123456
INSTALLATION WALKTHROUGH:
For more information log onto www.curtmfg.com, & for helpful towing tips log onto www.hitchinfo.com
Parts List
DESCRIPTIONPART NUMBERQTYITEM
HEX BOLT
M12-1.25 x 35mm61
WASHER,CONICAL,TOOTHED,1/2"1/2 CONICAL TOOTHED WASHER62
1
2
FASCIA
DRIVER SIDE
FRAME RAIL
PASSENGER SIDE
FRAME RAIL
UNDERBODY PANEL
(SHOWN TRIMMED)
2. Remove the (4) rubber plugs from the frame rails and unscrew
the (3) threaded plastic inserts from the driver side frame rail.
Return plugs and inserts to owner.
3. Mark the lower fascia exhaust air deflector 2" from the "hinge"
and trim as shown below to allow room for the hitch.
1. Remove the (7) fasteners securing the driver side underbody
panel. After lowering the underbody panel return it to the
owner or trim and reinstall in Step (5).