Instruction manual
GB-6
Before Use Operation SpecificationCleaning and Maintenance Safety Warnings
Cleaning Before Use
Wipe the inside of the wine cooler with a weak solution of bicarbonate soda. Then
rinse with warm water using a ‘wrung-out’ sponge or cloth. Wipe completely dry before
replacing the shelves and bottle rack. Clean the exterior of the wine cooler with a damp
cloth.
If you require more information refer to the CLEANING section.
• Before Plugging in YOU MUST
• Check that you have a socket which is compatible with the plug supplied with the
wine cooler.
• Before Turning On!
Do not turn on the appliance for two hours after moving the wine cooler. The
coolant fluid needs time to settle.
Before Using Your Wine Cooler
Before placing any wine in your wine cooler, turn it on and wait for 24 hours, to make sure
it is working properly and to allow the wine cooler to fall to the correct temperature. Your
wine cooler should not be overlled.