Owner`s manual

81
Training Wheels
There are two options when attaching the training wheels
to the wheel brace. Determine which option is used on your
bicycle and follow the given instructions for that option.
Option 1
First attach the training wheels to the wheel brace. Position
a washer on the shoulder bolt. Next, insert the shoulder
bolt through the wheel. Follow with another flat washer then
completely thread a hex nut onto the shoulder bolt. Insert the
shoulder bolt through the wheel brace and set the washer
on the shoulder bolt. Lock the training wheel into place by
screwing another hex nut onto the shoulder bolt. Repeat for
both training wheels.
Option 2
First attach the training wheels to the wheel brace. Insert the
shoulder bolt through the wheel. Follow with a flat washer.
Insert the shoulder bolt through the wheel brace and set the
washer on the shoulder bolt. Lock the training wheel into place
by screwing another hex nut onto the shoulder bolt. Repeat for
both training wheels.
Option 1
Option 2
It is very important to check the training wheel
connection to the bicycle. Failure to properly
tighten may cause the training wheel to dis-
lodge. Please contact Currie Technologies®
Service with any questions.
!