Owner`s manual

figure 1

figure 2

Fenders

Front Fender

The front fender is mounted at the fork crown. There are two

ways in which to mount your front fender. The first is the caliper

brake mounting system (see figure 1), and the second is the

10mm nut and bolt system (see figure 2). Identify the mounting

system used on your bicycle and follow the given instructions for

that particular type of mounting system.

1. Caliper Brake Mounting System

First remove the front wheel from your bicycle. Remove

the hex nut from the caliper brake bolt on the rear of the

fork, and slide the brake assembly from the fork. Place the

fender assembly onto the fork making sure the attachment

holes and fender bracket holes line up. Reattach the caliper

brake making sure that the brake arms are on each side of the

fender. Tighten the bolt until secure.

2. 10mm Nut and Bolt Mounting System

First remove the front wheel from your bicycle. Place the

fender assembly onto the fork making sure the attachment

holes and fender bracket holes line up. Attach the fender with

the 10mm hex bolt and nut. Tighten the bolt until secure.