Owner`s manual

Accessories

If your bike is supplied with a water bottle and cage, attach the

cage to the bicycle using the Allen bolts provided.

Some bikes come equipped with a saddle bag or frame bag.

The saddle bag installs under the seat with the zipper facing

the rear wheel. Undo the straps that wrap around the bag,

thread them through the rails underneath the seat and secure

around the bag. The smaller strap wraps around the seat

post. Frame bags install at the apex of the top and seat tubes.

Secure the straps around each tube.

NOTE: The frame bag straps must not bind the cables. The

straps must go around the frame only.

Other: Some 20” and 24” model bicycles come with a rear

derailleur guard to protect the rear derailleur from damage. To

install, remove the rear wheel axle nut on the drive side, install

the rear derailleur guard over the axle with the U-shaped guard

pointing down, and retighten the axle nut. The guard will sit

between the frame and the axle nut.

Saddle Bag

Frame Bag

Reflector

Water bottle and cage