Owner`s manual

40
Use only Currie Authorized SLA chargers with bicycles equipped with SLA batteries.
Using any other charger will damage the batteries and void your warranty.
!
XLR Plug
2v1h Plug
3v Plug
How to use the SLA Chargers (standard)
Plug the charger into the outlet. The indicator light on the top of the charger 1.
will illuminate when the charger is working properly. Refer to the sticker on the
charger for actual status light indication.
Insert the plug (XLR, 2v1h or 3v) into the charger port on the bike being sure 2.
the charger plug is fully seated in the charger port. The light should be solid
red or blinking green to indicate charging however you will need to refer to the
sticker on the charger for actual status light indication.
Once the battery reaches full charge, the light will return to solid green 3.
however you will need to refer to the sticker on the charger for actual status
light indication.
When charging is complete, unplug the charger from the wall before removing 4.
it from the charger port.
Charge for the full time. If the battery still has not charged, you may need to replace it.
Example of SLA Charger
w/ XLR Plug