Owner`s manual

13
Your new bicycle was partially assembled in the factory and then partially disassembled for shipping. You may
have purchased the bicycle already fully assembled and ready to ride OR in the shipping carton in the partially
disassembled form. The following instructions will enable you to prepare your bicycle for years of enjoyable
cycling. For more details on inspection, lubrication, maintenance and adjustment of any area please refer to the
relevant sections in this manual. If you have questions about your ability to properly assemble this unit, please
consult a qualified bicycle service specialist before riding. If you need replacement parts or have questions
pertaining to assembly of your bicycle, call the service line direct at:
SERVICE AND TECHNICAL SUPPORT:
1 800 377 4532
Monday - Friday 8:00 a.m. - 4:00 p.m. (PST)
Tools Required:
• Phillips head screw driver
• 2.5mm, 3mm, 4mm, 5mm 6mm & 8mm Allen keys
• Adjustable wrench or a 8mm, 9mm, 10mm, 13mm, 14mm
& 15mm open and box end wrenches
• A pair of pliers with cable cutting ability
To avoid injury, this product must be properly assembled before use. If your bicycle was
obtained assembled, we strongly recommend that you review the complete assembly
instructions and perform checks specified in this manual before riding.
!