Technical information
8
e4.5 Owner's Manual.indd, Last Modied: December 28, 2012 10:49 AM
Both the front and rear tires on the e4.5 are pneumatic, meaning they need to be kept inated at the proper air pressure to
work properly. Just like a car tire, the proper ination pressure is molded into the sidewall of the tire. Unlike a car, it is best
to inate your scooter’s tires with a hand pump (usually sold for inating bicycle tires), to avoid overlling.
To inate the front tire:
1. Remove the valve cap from the air valve.
2. Add air as needed, checking the pressure regularly to avoid overlling.
3. Reinstall the valve cap.
To inate the rear tire:
1. Move aside the door on the chainguard covering the valve. Align the tire valve with the hole in the chainguard, and
remove the valve cap.
2. Install the supplied valve extender.
3. Add air as needed, checking the pressure regularly to avoid overlling.
4. Remove the valve extender, reinstall the valve cap, and close the cover door.