Technical information

12
e4.5 Owner's Manual.indd, Last Modied: December 28, 2012 10:49 AM
SCOOTER USE
Before riding your scooter for the rst time, you should fully charge the battery. This may take up to 6 hours. See the sec-
tion of this manual on battery charging for more information.
Turn the scooter on by ipping the power switch on the deck.
1. To get going, just twist the throttle on the right side of the handlebars.
2. To stop, pull the left-hand brake lever to slow the rear wheel. Try not to skid the wheel; the tire can develop at spots
and cause a bumpy ride.
In order to ensure your scooter’s battery lasts as long as possible, you should fully charge the battery
after each and every ride. Please see the section of this manual on battery care for more information.