Specifications

39
How to use the Li-Ion Chargers
Before using the charger locate the voltage selector switch (Li-Ion chargers only) on the back of the charger.
Select either 115 Volts or 230 Volts depending on the country you reside in. Using the wrong voltage setting will
permanently damage the charger and/or electrical components on the hybrid electric bicycle.
Select the proper voltage for your country1.
115V for North American•
230V for Asia and Europe•
Voltage Selector
Switch
Connect power cord to charger then plug power 2.
cord into wall outlet
Power Switch - turn
to “OFF” position
Be sure the charger’s power switch is turned “OFF” (red 3.
light should be off) front and rear views below
Red light
should be
“OFF”