Specifications
19
5. Bearings
Ensure all bearings are lubricated, run freely and display no excess movement, grinding or rattling.•
Check headset, wheel bearings, pedal bearings and bottom bracket bearings.•
6. Cranks and Pedals
Ensure pedals are securely tightened to the cranks.•
Ensure cranks are securely tightened to the axle and are not bent.•
7. Derailleurs
Check that front and rear mechanisms are adjusted and function properly.•
Ensure shift and brake levers are attached to the handlebar, shift and brake. •
Ensure derailleurs, shift levers and shift and brake cables are properly lubricated.•
8. Frame and Fork
Check that the frame and fork are not bent or broken.•
If either are bent or broken, they should be replaced.•
9. Accessories
Ensure that all reflectors are properly fitted and not obscured.•
Ensure all other fittings on the bike are properly and securely fastened, and functioning.•
Ensure the rider is wearing a helmet. •
10. Motor Drive Assembly and Throttle
Ensure all motor drive components are correctly mounted and functioning properly.•
11. Battery Pack
Ensure the batteries are in good operation condition and kept fully charged.•