Specifications

18
SAFETY CHECKLIST
Before every ride, it is important to carry out the following safety checks:
1. Brakes
Ensure front and rear brakes work properly.•
Ensure brake shoe pads are not over worn and are correctly positioned in relation to the rims. •
Ensure brake control cables are lubricated, correctly adjusted and display no obvious wear.•
Ensure brake control levers are lubricated and tightly secured to the handlebar.•
2. Wheels and Tires
Ensure tires are inflated to within the recommended limit as displayed on the tire sidewall.•
Ensure tires have tread and have no bulges or excessive wear. •
Ensure rims run true and have no obvious wobbles or kinks. •
Ensure all wheel spokes are tight and not broken.•
Check that axle nuts are tight. If your bicycle is fitted with quick release axles, make sure locking levers are •
correctly tensioned and in the closed position.
3. Steering
Ensure handlebar and stem are correctly adjusted and tightened, and allow proper steering. •
Ensure that the handlebars are set correctly in relation to the forks and the direction of travel.•
Check that the headset locking mechanism is properly adjusted and tightened.•
If the bicycle is fitted with handlebar end extensions, ensure they are properly positioned and tightened.•
4. Chain
Ensure chain is oiled, clean and runs smoothly.•
Extra care is required in wet or dusty conditions.•