Owner`s manual

9. Apply grease to the inside of the seat tube, then insert the
seatpost and close the quick release tightly. It will help during the next
steps if you lower the seat completely; it can be adjusted to a comfortable
height before your rst ride.
Refer to the owner’s manual for more information on the use and adjustment
of quick release levers. It is vital to your safety that you understand and
properly secure this lever!
Swing QR Closed
Seatpost
Currie Technologies Technical and Customer Service 1-800-377-4532
G
H
10. Release the front brake by pulling back the rubber boot, squeezing
the brake arms together, then removing the noodle from its holder. This will
allow you to install the front wheel. You will need to reattach the brake by
reversing this step once the front wheel is installed.
Brake Noodle
Boot
11. Flip the bike
over so that it rests
on its handlebars and
saddle. Be careful not
to damage the throttle
or brake levers.
Remove the plastic
dropout protector from
the end of the fork.
I