Owner`s manual

33
www.CurrieTech.com
Currie Technologies
®
To reassemble the front wheel, first slightly inflate the tube to allow it
to take shape then install into the tire.
Insert the valve thru the hole in the rim.
Push (by hand only) one side of the tire and tube all the way over and
onto the rim.
With a bicycle tire lever seat the other side of the tire onto the rim. Be
sure not the pinch (tube puncture caused by being caught between the
tire and rim) the tube.
Inflate the tire slowly to the recommended tire pressure. Inspect the
tire during inflation to ensure it is seating onto the rim properly.
7.
8.
9.
10.
11.
Chain Drive Scooters.indd 33Chain Drive Scooters.indd 33 3/18/2008 12:18:53 PM3/18/2008 12:18:53 PM