Owner`s manual

16
Customer Service 1-800-377-4532
Currie Technologies
®
using the Currie “Smart Charger”, we
recommend that you do not leave the
charger plugged in for more than 24
hours.
CHANGING THE BATTERY PACK
IMPORTANT: Be sure the
power switch on the scooter is
in the “OFF” position.
Remove the deck by unscrew-
ing the “D” ring deck retention
screw then lifting the deck off.
(Ref Photo A)
Remove the battery pack out of
the scooter’s battery tray. (Ref
Photo B)
Disconnect the battery power
pack connector (cut zip tie
holding the wire connector, if
necessary) (Ref Photo C)
Place the new or fully charged
battery pack into the battery
tray.
Reconnect the battery pack
connector and place all of the
cables into the tray.
Re-install the deck and secure
with the “D” ring deck retention
screw.
1.
2.
3.
4.
5.
6.
7.
Photo A
Photo B
Photo C
Chain Drive Scooters.indd 16Chain Drive Scooters.indd 16 3/18/2008 12:18:26 PM3/18/2008 12:18:26 PM