Technical information
28
Nano manual.indd, Last Modied: May 31, 2012 12:32 PM
29
ADDT’L SAFETY INSTRUCTIONS
These instructions update the owner’s manual to ASTM F2642 standard. Failure to read, understand and follow
the instructions in this manual may lead to serious injury or even death.
» Do not allow hands, feet, hair, body parts, clothing, or similar articles to come in contact with moving parts, wheels or
drivetrain, while the motor is running.
» Make sure that the areas that the scooter is to be used in is safe and suitable for safe operation.
» Make sure that all safety labels are in place and understood by the rider. No passengers are allowed on the scooter
» Make sure that any and all axle guards, chain guards, or other covers or guards supplied with the scooter are in place and in
good working condition.
» Make sure that tires are in good condition, inated properly, and have sufcient tread remaining.
» Persons with following conditions are cautioned not to operate the scooter:
» Those with heart conditions
» Pregnant women
» Those with head, back, or neck ailments, or prior surgeries to those areas of the body
» Those with any mental or physical conditions that may make them susceptible to injury or impair their physical dexterity
or mental capacities to recognize, understand and perform all of the safety instructions and to be able to assume the
hazards inherent in operating the scooter.
SAFETY INSTRUCTIONS (INSERT)
ADDT’L MAINTENANCE INSTRUCTIONS
These instructions update the owner’s manual to ASTM F2642 standard.
» The solid rubber tires on this scooter do not require ination.
» No lubrication is required except for the chain. Use chain lube.
WARNING
!
FCC INSTRUCTIONS
FCC Warning for the battery charger
Warning: Changes or modications to the charger not expressly approved by the party responsible for compliance could void the user’s
authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the
FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This
equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions,
may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
* Reorient or relocate the receiving antenna.
* Increase the separation between the equipment and receiver.
* Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
* Consult the dealer or an experienced radio/TV technician for help.