Service manual

4
Currie Technologies // Service Manual (Version 2008a)
ELECTRONIC COMPONENT IDENTIFICATION DIAGRAM - RMB (2007) (Diagram is for representational purpose only. Your bicycle's electronic components may differ)
Battery Pack, RMB
Shown w/ optional 2nd
battery pack
Battery Terminal
1 each side of rack
Electric Motor
Mounted on left side of
bicycle
PAS Sensor
Mounted on BB Cup between lockring and BB Shell
Switch (2 position)
Located behind seat tube
Brake Lever w/
Brake Inhibitor
Controller
Housed behind seat tube,
accessible on left side
Black Box
Housed behind seat tube,
accessible on left side
White Box
Housed behind seat tube,
accessible on left side
Throttle
Battery Terminal Wire Harness
1 each side of chainstay
PAS Sensor Ring
Mounted on left side BB Spindle between left side
crankarm and BB
Charger Port
Located under the fl ip-up
handle
, accessible on left side
Fuse
Located on
backside of
battery pack