Service manual

3
Currie Technologies // Service Manual (Version 2008a)
ELECTRONIC COMPONENT IDENTIFICATION DIAGRAM - RMB (2008-) (Diagram is for representational purpose only. Your bicycle's electronic components may differ)
Battery Pack, RMB
Optional 2nd battery pack can be
mounted on opposite side
Battery Terminal
1 each side of rack
Electric Motor
Mounted on left side of
bicycle
PAS Sensor
Mounted on BB Cup between lockring and BB Shell
Switch (2 position)
Located behind rear refl ector
Brake Lever w/
Brake Inhibitor
Controller
Housed inside rack
Black Box
Housed inside rack
White Box
Housed inside rack
Throttle
Battery Terminal Wire Harness
1 each side of rack
PAS Sensor Ring
Mounted on left side BB Spindle between left side
crankarm and BB
Charger Port
Located under the fl ip-up
handle
Fuse
Located on
backside of
battery pack