Service manual

22
Currie Technologies // Service Manual (Version 2008a)
FUSES
All Currie Technologies® Hybrid Electric Bicycles are equipped
with fuses. The fuse may be located, depending on the model
of bike, in the following locations
CX Series (40a glass type fuse) - On the battery pack,
externally accessible
RMB Series (40a glass type fuse) - On the backside of
the battery pack, externally accessible
STB Series (24v, 40a glass type fuse) - Inside the
battery, must open the battery pack to access
STB Series (36v, 40a glass type fuse) - On the battery
pack, externally accessible
Enlightened Series (NiMH, 30a blade type fuse)
- inside the bottom end of the downtube, remove
downtube cap to access
Enlightened Series (Li-Ion, 30a blade type fuse &
5a blade type fuse) - inside the bottom end of the
downtube, remove downtube cap to access
In the event of an overload the fuse will pop (see graphic below
for example) and need to be replaced. In this instance replace
only with approved part from Currie Technologies®
•
•
•
•
•
•
Risk of fi re. Do not bypass fuse.
!
STB Bicycles (24v)
Enlightened Series (Li-Ion)
STB Bicycles (36v)
RMB Bicycles (2007, 2008)CX Bicycles
Blade Type Fuse
BAD
Notice broken fi lament
Blade Type Fuse
GOOD
Glass Type Fuse
BAD
Notice broken fi lament
Glass Type Fuse
GOOD
Enlightened Series (NiMH)