Service manual

20
Currie Technologies // Service Manual (Version 2008a)
MAIN POWER SWITCHES
STANDARD POWER SWITCHES
The power switch may be located, depending on the model of
bike, in the following locations
On the battery pack itself (CX and STB Series)
On the side of the downtube (Enlightened Series)
Be sure to turn the switch off whenever you are not using the
bicycle or when charging the bicycle.
•
•
STB BicyclesCX Bicycles
RMB Bicycles (2007)
RMB Bicycles (2008-)
DUAL POWER SWITCHES
Bikes with dual rack mounted battery packs (RMB 2007 and
RMB 2008) are also equipped with a dual power switch. This
switch has two "ON" positions that corresponds to the two
battery packs. The switch is "OFF" when placed at the center
position.
The power switch may be located, depending on the model of
bike, in the following locations
On the side of the controller box (RMB Series 2007)
On the backside of the rack behind the rear reflector
(RMB Series 2008-)
Be sure to turn the switch off whenever you are not using the
bicycle or when charging the bicycle.
•
•
•
= Pack 2 “ON”
O “OFF”
- Pack 1 “ON”
Meaning of Dual Power
Switch markings
Always turn the power switch (all types) “OFF” when
charging the hybrid electric bicycle. This prevents
accidental/unintentional activation of the motor and
avoids the possibility of unanticipated circumstances
such as an unexpected power surge from a lightning
strike (or other power line anomaly) potentially causing
damage to the electrical components.
!
Enlightened Bicycles