Service manual

Currie Technologies // Service Manual (Version 2008a)

HOW TO CHECK BATTERY VOLTAGE VIA THE

CHARGER (XLR) PORT

Using a multimeter set to vDC (see instructions provided by

multimeter manufacturer) insert the Red (positive) probe into

hole #1 and the Black (negative) probe into hole #2.

If you get a negative value (i.e. -26.2v) you simply have the

probes reversed.

For a 24v battery pack (regardless of the type of battery) a

reading of above 26v indicates that the batteries are full.

HOW TO CHECK BATTERY VOLTAGE VIA THE

CHARGER (2V1H OR 3V) PORT

Using a multimeter set to vDC (see instructions provided by

multimeter manufacturer) carefully touch the Red (positive)

probe to the #1 pin and the Black (negative) probe to the #2

pin.

If you get a negative value (i.e. -26.2v) you simply have the

probes reversed.

For a 24v battery pack (regardless of the type of battery) a

reading of above 26v indicates that the batteries are full.

For a 36v battery pack (regardless of the type of battery) a

reading of above 38v indicates that the batteries are full.

3v Charger Port

2v1h Charger Port

Pin # 1 Pin # 2