Owner`s manual
22 23
www.CurrieTech.com
Currie Technologies
®
Currie Technologies
®
OM Direct Drive Scooters - 2012.indd
Modied 05/25/2012
DRIVE TRAIN ASSEMBLY
The DD scooter series is equipped with the
Currie Technologies
®
Direct Drive propulsion
system, the finest available in today’s rapidly
growing personal electric transportation
market.
The Currie Direct Drive systems features a
DC motor with direct drive to the rear wheel,
a weather and dust resistant motor controller,
plus rechargeable and recyclable sealed lead
acid batteries that provide many hours of
trouble free riding.
The Direct Drive motor and drive train system
comes fully assembled and “ready-to-ride” from
the factory. No maintenance is required and
the gear box does not need to be opened, this item is not designed to be
user serviceable.
IMPORTANT: All Direct Drive motors, throttles and the controllers are factory
sealed units and are not user serviceable. Do not open or tamper with any of
the factory sealed units; doing so may result in electric shock or injury and
will render them inoperable.
For answers to service questions regarding the Electro-Drive™ drive train,
please contact your local dealer, or call Currie Technologies
®
Customer
Service at: 1-800-377-4532.
Drive train on the DD Series of
scooters
WHEEL REMOVAL
FRONT WHEEL REMOVAL
500DD, 750DD, 1000DD AND SCOOT-E
DD SERIES SCOOTERS
1. Detach the V-Brake, if your
scooter was so equipped, (Ref
Photo A) by removing the brake
noodle (silver tube) from the
brake arm. Scooters equipped
with disc brakes do not need the
cable detached.
2. Loosen the axle nuts. (Ref
Photo B)
3. Remove the safety washers
from the dropouts. (Ref Photo
C)
4. Remove the front wheel from
the forks.
Be sure the
scooter does not
fall over and cause damage to itself
WARNING
!
Photo A
Photo B
Photo C