Technical data

IEC09000378-1-en.vsd
IEC09000378 V1 EN
Figure 5: Error message due to mismatch between PCM600 and IED technical key
Be sure that the IED object in PCM600 has the same IP address as the
physical IED, which is intended to be connected through the technical
key concept.
The technical key for an IED object in PCM600 can also be changed in
the Object properties window.
1. Select the IED in the Plant Structure.
2. Right-click and select Set Technical Key, see Figure 6.
1MRK 511 261-UUS A Section 4
Setting up a project
650 series ANSI 29
Engineering Manual