Technical data

IEC08000339.vsd
IEC08000339 V1 EN
Figure 78: CMT: Marker to indicate changes in the container
9.4 Setting DNP3 signal parameters
Two parameters per signal can be set for all signal types:
• The index of the signal
• The class configuration
Procedure to set the index of the signal:
1. Click the two inner arrows to sort signals to another index sequence, or select Set
Index ... from the context menu to move one or a set of signals to another array,
see Figure 79.
IEC08000336.vsd
IEC08000336 V1 EN
Figure 79: CMT: Context menu in DNP3 window
2. The selection window shows the number of signals selected, see Figure 80.
1MRK 511 261-UUS A Section 9
DNP3 communication engineering
650 series ANSI 121
Engineering Manual