Instruction Manual www.currentaudio.
Safety Instructions 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. 13. 14. 15. 16. ! Read these instructions completely prior to use or hook-up. Keep these instructions for future reference. Record Model Number_______________ and Serial Number _____________________ Understand and heed all Warnings. Follow all instructions. Do not use soundbar or subwoofer near water, rain or high moisture. Clean only with a dry cloth. Never use solvents. A microfiber cloth is recommended.
Thank you for purchasing the Current Audio Home Theater SoundBar. Please read this manual thoroughly before making any connections or applying AC power. This manual applies to the SB80 and SB65 SoundBar Systems. Follow the instructions in this manual. It will allow you to obtain the maximum performance and listening pleasure from your new amplifier. Please retain this manual to use as a future reference.
Soundbar SB80 and SB65 by Current Audio The SB80 and SB65 SoundBar describes the latest digital technology in amplified speaker sound bars with a powerful wireless amplified MegaBass subwoofer by Current Audio. The powerful subwoofer can be located anywhere in the room. This is the perfect Home Theater System with a wide sound stage. The system comes with a handheld remote to control power, switch inputs and adjust sound fields. You may also use the touch screen buttons on the SoundBar.
SB80 Home Theater SoundBar Elements 3 5 4 SB80 Rear Input View 1 2 8 9 6 10 Remote 11 12 7 15 16 14 Subwoofer Picture w Inputs www.currentaudio.
INSTALLATION Getting Started SoundBar Placement Note: Current Audio D-Force SoundBar requires adequate free air space for safe and proper operation. Where to Locate SoundBar Either mount the SoundBar on a flat horizontal surface centered in front of the TV or surface wall mount the SoundBar on the wall via the Key Hole slots. Use proper wall anchors to support the weight of the SoundBar.
INSTALLATION Making Connections See picture for Hook-Up Use quality connection cables for best performance SoundBar Rear Panel Inputs Connect Red and Black Stereo RCA Plug from TV Optical Digital Cable Optical & RCA Coax Digital Connect Blue FM RCA Plug 3.5mm Stereo Plug from Mobile Device www.currentaudio.
INSTALLATION Setup for SoundBar and Wireless Subwoofer Matching The wireless signal between the SoundBar and the MegaBass is factory set. In order for the SoundBar to communicate with the wireless MegaBass subwoofer the units must sync with each other. If the units are not in sync the following steps will allow the two units to talk with each other and allow the subwoofer to receive the low frequencies from the SoundBar. 1. 2. 3. 4. 5. 6. 7. 8. Plug the subwoofer into a close 110VAC outlet.
INSTALLATION Remote Control Functions See picture for functions Power – ON/OFF Mute – toggle ON/OFF Match – for pairing SoundBar to MegaBass unit. Indicated by Antenna symbol. Turn Display on or off DSP- toggle 2.0/2.1 Set - Setting clock. Toggle to am/pm, hour minutes. (+) (-) to adjust.
Bluetooth connection guide for model SB80 1. Turn the power on the SoundBar SB80 with the remote control 2. Press the “BT” button on the remote control, BT will be displayed in the upper left hand portion of the LCD screen 3. Turn on your Bluetooth compatible device and allow it to search for the SoundBar. The default name of the SoundBar is OVC3860. The connect it by using 0000 as the security code. 4. Please see your device’s Bluetooth connection directions for further details. www.currentaudio.
INSTALLATION Troubleshooting Trouble Possible Cause Unit not plugged into AC power Audio cables Not properly connected No Sound No Audio from Subwoofer No Audio from USB /SD Possible Solution Check power, plug in to a live unswitched outlet. Check cable connections. Replace cable. Check if connected to proper inputs. Master Power Switch on rear Place Master Power switch to ON. Front Power Switch Switch from Standby to ON Change to proper Input Change from any input back to desired input.
