Installation guide

ManualsBrandsCurrent Cost ManualsComputer equipmentEnviR

A big thank you for taking the decision to reduce your energy use. The planet

needs more people like you. If we all do our bit to stop wasting electricity we

can signiﬁcant reduce our carbon footprint.

The beauty of the ENVI is that it shows you how much energy you are using right now.

It also shows you how much your electricity is costing every day and every month.

The ENVI will allow you to take control of your energy use and SAVE Money while

helping reduce your carbon footprint.

ENVI Installation

Guide

Summary of content (5 pages)

PAGE 1
ENVI Installation Guide A big thank you for taking the decision to reduce your energy use. The planet needs more people like you. If we all do our bit to stop wasting electricity we can significant reduce our carbon footprint. The beauty of the ENVI is that it shows you how much energy you are using right now. It also shows you how much your electricity is costing every day and every month. The ENVI will allow you to take control of your energy use and SAVE Money while helping reduce your carbon footprint.
PAGE 2
How the ENVI works ENVI Functions and Features Overview The ENVI uses clamps that detect a tiny magnetic field that is created as current moves through power cables. The greater your energy use, the greater the magnetic signature. The clamps are connected to a transmitter that sends a signal wirelessly to the display every 12 seconds. The display calculates the data and shows you how much energy you are using in real time. It also stores your historical energy usage.
PAGE 3
STEP A Pair Display to the Transmitter • Plug display power supply into back of display. • Plug display into convenient wall outlet. • Remove plastic battery tab from transmitter. • The red LED light on the transmitter should be flashing slowly. If not, check the batteries. • Check the display and compare it to the two images below to determine if the unit is paired. System is Paired If the display looks like the image to the left displaying 0.
PAGE 4
STEP Multiple Rate Tariffs The ENVI can be programmed to calculate different KWh unit rates for electricity consumed at different times of day. In order to program different rates: • Press and hold the UP and DOWN buttons together until the LED flashes . Then release both buttons. • Using the UP and Down buttons you can select your low cost rate. Press the OK button to confirm rate.—If you do not select a different rate, then you will not see the time section. • You will see the clock flashing.
PAGE 5
Limited One Year Warranty PowerSave Inc. warrants this product for a period of one (1) year from date of purchase for all defects in workmanship or materials to the original user or consumer purchaser. This warranty excludes and does not cover defects, malfunctions, or failures caused by misuse, unauthorized repairs, modifications or accidental damage. All defective parts will be repaired free of charge or replaced. Note: This warranty does not apply to batteries.