User guide

14 15
IAMs – Individual Appliance Monitor
In-home, real-time individual appliance monitors are a great addition to the Current Cost EnviR energy
monitor. The IAM plug-in device transmits energy usage data of specic appliances to the display (the amount
of Watts consumed and the associated cost). The EnviR can record up to nine IAMs so you can discover the
cost and usage of your electrical appliances in the home.
PC Connectivity
Using the Current Cost RJ45 to USB Data Cable, you can download data from your EnviR monitor to your
PC.
Current Cost HomeSmart Software ** Exclusive to all EnviR users**
This free software has been developed with the rst time user in mind. Easy to set up and use, the
HomeSmart software allows you to track your energy data day and night, helping to understand usage
patterns and more importantly identify where wastage is occurring. When used with the Current Cost Data
Cable you can download your historical data as often as you wish. It’s easy to get started, simply email us at
[e-mail] and we will send you the link.
NetSmart
The Current Cost NetSmart device, allows you to send real time energy usage data to the Current Cost Web
Dashboard by connecting your monitor to your broadband connection. With this device you no longer have to
have your Current Cost display connected to your PC or laptop to send real time data information.
Current Cost Web Dashboard
The Current Cost Web Dashboard is an online service that receives data from ENVI and EnviR models.
The Dashboard allows users to remotely view and interrogate their energy usage via their PC, laptop or
Smart phone, wherever they might be in the world. As well as having the ability to view the data from up to 9
additional channels, customers can also share energy usage on social media platforms such as Facebook
and Twitter.
**Customers will require a NetSmart device to access their data on the Current Cost Web Dashboard.
Fascias
Accessorise your Current Cost EnviR with a range of changeable fascias. The EnviR can now complement
any room with a range of colours. All accessories for the EnviR are available at www.currentcost.com
C
2
or S
2
Technology
Wherever you see the C
2
or S
2
logo, you know it’s a member of a family of products that enables you to
manage your energy consumption.
Look out for the logo on other Current Cost products as well as our partner organisations. When you buy a C
2
or S
2
product you can feel safe in the knowledge that it is of the highest standard and that it will communicate
with your other C
2
or S
2
equipment.
Troubleshooting
Your Current Cost monitor should reach you in perfect condition. If you have connected it properly but
can’t get it to work, please check the following before contacting us for assistance.
If the information above has not resolved your problem either contact our Customer Service Team on
[phone]
Alternatively visit www.currentcost.com/faq.html to nd our “Frequently Asked Questions” page or
www.currentcost.com/contact.html to contact a member of the Current Cost team.
Problem Possible Cause Solution
No display Faulty display and/or display
power supply
Contact supplier
Corrupted display (incomplete
data)
Faulty display Contact supplier
Alternating readings Display picking up a signal
from a neighbours’ transmitter
Pair your transmitter and
display again, see page 7
Data does not change The clamp should not be
placed around a multicore
cable, but 1 exposed cable.
Refer to diagram on page 9
Costs reading seems
excessively high or low
Correct tariff has not been set Refer to page 13 – Adjusting
your electricity price
Temperature gauge
excessively high
Display too close to heat
source
Choose a different location
enabled
433MHz
enabled
433MHz
Changes or modications not expressly approved by the party responsible
for Compliance could void the user’s authority to operate the equipment.