Technical data

58
System cabinets
System cabinets
Exchange Cabinet Configurations
All exchanges ranging from
LBB 7112/04 to /06 and from LBB
7112/14 to /22 are delivered with suit-
able cabinet 19 racks. The rack sizes
are chosed to house an optional fan
module and the racks used for the SO
exchanges family have a reserved space
for an optional ODIN controller.
Exchanges with up to three modules,
LBB 7112/00 to /03 and LBB 7112/07
to /13 are housed in EMC proof alu-
minium cabinets and delivered with
brackets for rack mounting. See pages
43 - 49 for standard module configura-
tions in the standard racks.
CABINET RACK EXCHANGE TYPE LBB 7112/..
Type Height /00 /01 /02 /03 /04 /05 /06 /07 /08 /09
A1 Cabinet 3U 1
A1 Cabinet 6U | 1 1 2 3 1 1 1
LBB 7108/10 27U
LBB 7108/30* 33U
LBB 7108/40 39U 1 1
LBB 7108/60 45U 1
Type Height /10 /11 /12 /13 /14 /15 /16 /17 /18 /19 /20 /21 /22
A1 Cabinet 3U 1 1 1 1
A1 Cabinet 6U 1 2 3
LBB 7108/10 27U 2
LBB 7108/30* 33U
LBB 7108/40 39U 1 2 2 2 2
LBB 7108/60 45U 1 2 2
* Available on special request only
EMC cabinet wrapping
All the 19 inch frames used are designed
considering EMC legal requirements.
The frames can be equipped with con-
ducting front, back, top and bottom
covers in order to reduce radiation.
Power supply and function cards used
in the M100 S range have also been
designed considering EMC require-
ments.
On a project basis, complete shielding
including line termination can be
obtained by installing special filtering
equipment on the line outputs.