Technical data

42
Ho
Ho
w to b
w to b
uild a complete ex
uild a complete ex
change
change
In order to build a complete Intercom,
Hospital or Prison communication
system the following steps must be consid-
ered depending on the application:
1. Select exchange type
Select any exchange by typenumber accord-
ing to requirements for functions, number
of stations and network:
l SB-80 Basic function exchange for
standard applications (page 43)
l S-72 to S-384 Stand-alone exchange
(page 44-45)
l SO-72 to SO-768 ODIN network
exchange (page 46-49)
2. Select Line cards (page 53)
Select type and number of line cards:
l Line card, 8 stations
l Line card, 6 stations 2 loudspeaker
points
l Line cards, 8 loudspeaker points
l Line card 6 stations, 2 couplers
l Open line check
3. Select line termination type (page 53)
All incoming lines from connected
station and terminals have to be
terminated at the exchange.
l Line termination unit for up to 80
intercom extensions
l Line termination panel mounted at
the rear of the exchange with
line termination cables, each cable
for connecting 16 2-wire extensions
4. Voice board (page 53)
Select voice options:
l Voice card for pre-recorded messages
and optional voice mail (requires
RAM chip OC type)
l Requires one ACIA card in all
ODIN exchanges
5. Connection of PCs (page 54)
Select PC interface for the PC:
l VDU termination opto interface
l PC opto interface card for plastic
fibre (max. 30 m)
l PC opto interface card for glass fibre
(max. 1.5 km)
l Opto cable, plastic fibre (max. 30 m)
6. PC programs (page 59-60)
Select type of PC programs.
l PC system maintenance program for
Windows
l Basic call monitor program (not for
SB-80)
7. Couplers (page 55)
For interfacing to selective radio, paging,
tieline or telephones.
8. ODIN network (page 56-57)
SO exchanges used in an ODIN-network
require an ODIN controller.
Expanding installed exchanges
(page 51-52)
Select upgrade/expansion unit or kit:
l S-72 Sub-exchange
l S-64 Sub-exchange
l SB-80/S-72 Function upgrade kit
l SB-80/SO-72 Function upgrade kit
l S/SO Function upgrade kit
l 216/256 Expansion kit
l SO-320/SO-384 Expansion kit
For detailed information see relevant
chapter in this system description.