Technical data

15
Station kits and co
Station kits and co
upler
upler
LBB 7072/10
Master station kit
LBB 7072/32
Single/Dual call station kit
The kit is a complete master station but
delivered without cabinet, intended for
self-mounting or as a spare part kit for
M100 S master stations.
The kit contains the following parts:
- loudspeaker including wires with
connector
- complete keyboard with all master
station keys and mounting frame
- electret microphone with wires and
connector
- station PCB with flat cable keyboard
connector
- 4-wire station cable with open ends
The kit is a complete single/dual call sta-
tion but delivered without cabinet, intend-
ed for self-mounting or as a spare part kit
for M100 S single/dual call stations.
The kit contains the following parts:
- loudspeaker including wires with
connector
- an A and a B key for calling pre-set
numbers
- reset key
- red LED lamp for indication of station
in use
- electret microphone with wires and
connector
- station PCB with single-in-line key-
board connectors
Dimensions (wxhxd) in mm/inch: LBB 7072/10 LBB 7072/32
Environmental conditions, category: T1 T1
Approval: CE CE
Supply voltage : 36 V d.c. 36 V d.c.
- At the station, idle <10 V d.c. <10 V d.c.
- At the station, in operation 18 - 36 V d.c. 18 - 36 V d.c.
Current consumption
- At the station, idle <0.3 mA <0.3 mA
- At the station, in operation 25 - 38 mA 25 - 38 mA
Output power (continuous/peak): 90/300 mW 90/300 mW