8-05-98 19:49 Data subject to change without notice. 3924 981 15511 09/97 © Philips Electronics N.V. 1997 08704-intercom-oms.qxd Side 1 All round expertise Philips leads the way with total solutions for communications and security applications. Dedicated expertise in access control, closed-circuit TV, congress, intercom, paging and public address means even the most demanding requirements can be met. Compability and flexibility are guaranteed by the integrated system approach.
Dokument1 18-05-98 20:50 Side 1
M100 Intercom & Nurse Call Catalogue Table of contents M100 SB-80 Basic function exchange . . . . . . . . . . . . . .43 M100 Stand-alone exchanges . . . . . . . . . . . . . . . . . . . .44 M100 S-72 Stand-alone exchanges . . . . . . . . . . . . . . . .45 M100 SO-72 ODIN Network Exchanges . . . . . . . . . . .46 Exchange expansion units and kits . . . . . . . . . . . . . . .50 Line termination equipment, voice board and line cards . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Introduction M100 Intercom System Modern, advanced communication systems are designed to simplify contact between individuals in business and industrial environments as well as in public service institutions and health care. By doing so they help achieve greater efficiency and effectiveness in everyday operations. They also contribute to higher standards of performance and security. The resourceful way of achieving these aims... the flexible way... is investing in a Philips M100 Intercom System.
Standard stations LBB 7089/10 Desktop master station LBB 7089/15 Compact master station The desktop master station is designed for desktop use in office-like environments. The station cabinet is made in light grey ABS plastic for desk top or wall mounting. The compact master station has the same functional use as the desktop master station but is intended for areas and applications where compactness is of importance and where there is a requirement for surface or flush mounting in desk or wall.
Standard stations LBB 7089/16 Compact master display station LBB 7089/18 Compact master display station with back light The compact master display station is identical to the compact master station but also incorporates an LCD display. The station is identical to the compact master display station except that the display has a built-in back light for improved readability. Extra back light power is needed when used with the S-16 exchange.
Standard stations LBB 7089/31 Single call station LBB 7089/32 Dual call station The single call station is housed in a light grey ABS plastic cabinet for desktop or wall mounting and intended for indoor use. Ideal for use at doors or in lifts. The station can be used in connection with a CCTV camera system for remote observation. Kits are available for increased output power and/or remote door opening. They must be powered separately.
Industrial stations LBB 7089/20 Industrial master station LBB 7089/30 Industrial master display station with back light The industrial master station is designed for use in light industrial environments where there is a demand for flush or on wall mounting. If the latter is required, an optional on-wall back box is necessary. The industrial master display station is identical to the industrial master station but also incorporates an LCD display with a back light for improved readability.
Industrial stations LBB 7089/21 Industrial single call station LBB 7089/22 Industrial dual call station LBB 7089/24 Industrial call station, 4 buttons The industrial single call station is designed for quick single key access to one pre-determined station in any M100 S system. Ideal for use at doors, gates or in lifts. The industrial dual call station is identical to the industrial single call station but equipped with 2 call buttons and a call cancel button.
Heav y dut y and explosion-proof stations LBB 7089/40 Heavy duty master station Front plate in blank aluminium enshrouds polyurethane elastomere sealing caps covering the selection and function buttons. LBC 3490/10 Loudspeaker horn, 16 ohm Controls for simplex mode and system functions. +/- buttons for accepting and rejecting certain functions. Volume and privacy must be pre-set internally in each station. A call tone and a pilot lamp indicate connection.
Heav y dut y and explosion-proof stations LBB 7089/41 Heavy duty single call station It is ideal for use at doors or gates in a heavy duty environment or outdoors and exposed to all weather conditions. LBB 7089/42 Heavy duty dual call station A weather protection frame is available for further protection from rain and snow. By pressing the stations call button an indirect call will be initiated to a pre-determined location.
Heav y dut y and explosion-proof stations LBB 7089/50 Explosion-proof master station IIC LBB 7089/52 Explosion-proof dual call station IIC The station is housed in a splash-proof The station is housed in a double housdark grey cabinet for wall mounting. ing for wall mounting and consists of a The cabinet is made of glass fibre reflame-proof box for the electronics and a inforced, self-extinguishing polyester splash-proof dark grey polyester box for resin.
Special stations LBB 7089/96 Chemical resistant master station LBB 7089/97 Programme distribution station LBB 7089/28 Emergency station with key release The chemical resistant master station is designed for efficient, loudspeaking, handsfree communication in any M100 S system. It is delivered as a flush mount unit especially developed for use in hospital operating theatres or clean room environments.
Data - special stations LBB 7089/96 LBB 7089/97 LBB 7089/28 130x265x60 mm 5.12x10.43x2.36 in 100x227x60 mm 3.94x8.94x2.36 in 450 g 0.99 lb 93x224x70 mm 3.7x8.8x2.8 in 130x265x75 mm 5.12x10.43x3 in 1.4 kg 3.08 lb Housing: 675 g 1.
Station kits and coupler LBB 7072/10 Master station kit LBB 7072/32 Single/Dual call station kit The kit is a complete master station but delivered without cabinet, intended for self-mounting or as a spare part kit for M100 S master stations. The kit is a complete single/dual call station but delivered without cabinet, intended for self-mounting or as a spare part kit for M100 S single/dual call stations.
Station kits and coupler LBB 7999/35 M100 S P.A. coupler LBB 7073/65 Audio/Relay kit LBB 7073/66 Audio kit M100 S P.A. coupler for connection to any line in the system provides interface to a Public Address system. The P.A. coupler may be called from any station. When called, a relay contact for e.g. switching on the P.A. amplifier is activated, and the audio line is connected to the input of the amplifier (600 ohm/0dBm).
Station kits and coupler LBB 7073/67 Relay kit LBB 7073/68 Application kit This kit includes: This kit includes: - Relay function with adjustable timer for activating an external call device or for remote door-opening function - 16 W peak power amplifier for use with external loudspeaker External call/door opening Relay ratings: Relay timing 0.8 - 35 sec. Maximum switchable voltage 50 V d.c./125 V a.c.
Station accessories HANDSET KITS FRAMES AND BACK BOXES For use with master stations in noisy areas or when confidentiality is required. LBB 7073/70 Flush mount frame LBB 7073/60 On wall back box For flush mounting of compact stations with or without back box. Dimensions (wxhxd): 130x265x18 mm 5.12x10.43x0.71 in Cut-out hole (wxhxd): 107x231x63 mm 4.21x9.09x2.48 in For on wall mounting of heavy duty and industrial stations Station cord and termination included. Dimensions (wxhxd): 130x265x67 mm 5.
Station accessories LBB 7073/62 On wall back box, plastic version LBB 7073/74 Outdoor station heating kit STATION CORDS, WALL SOCKETS AND PLUGS LBB 7069/08 Wall socket, 6-pole, 10 pack Requires soldering of the installation cable inside the socket. LBB 7069/18 6-pole plug, male, 10 pack For on-wall mounting of compact stations. Station cord and termination included. Dimensions (wxhxd): 130x265x75 mm 5.12x10.43x2.
Mounting accessories On wall back box Flush mount back box, 60 mm On wall back box, plastic Flush mount back box, 75 mm Flush mount frame Weather protection frame 7073/60 7073/61 7073/62 7073/63 7073/70 7073/73 External power supply Station cord LBB LBB LBB LBB 7073/80 7073/82 7073/84 7071/71 Stations 8 W/8 ohm Desktop handset kit Handset with cradle kit Cradle bracket Heavy duty handset kit Accessories PSU/ Cords Heating kit LBB 7073/74 Outdoor station heating kit Loudspeakers LBB LBB LBB LBB L
7089/97 7089/10 7089/15 7089/16 7089/18 Kits KITS LBB 7073/65 LBB 7073/66 LBB 7073/67 LBB 7073/68 LBB 7073/74 < # ¤ § = = = = = Programme distribution station Desktop master station Compact master station Compact master display station Compact master display station with back light LBB 7089/31 Single call station LBB 7089/32 Dual call station LBB 7089/20 Industrial master station LBB 7089/30 Industrial master dislay station with back light LBB 7089/21 Industrial single call station LBB 7089/22 Industria
M100 Nurse Call System System build-up and description The Philips M100 Nurse call and Hospital communication system consists of a number of communication terminals for patients and staff, partly controlled through PAN buses connected to one or more exchanges with or without an ODIN distribution network. The heart of the system is the intercom exchange.
System build-up and description All PAN data is transmitted to an intercom exchange. The exchange is configured by a maintenance PC to handle the data thereafter given as alphanumeric information on a display station (nurse desk) and/or in radio-paging receivers as a bleep pattern and numeric terminal number (ward, room and bed). program for administration of patient-tostaff communication, nurse interface to paging or statistical program for logging, are available.
Equipment and accessories LBB 7077/10 Bedside station Two parallel remote control connectors Two independant medical alarm connectors Presence/reset button Assistance button Alarm button Presence/Reset button - Green button with presence symbol - Push when present at patient - Steady green light when operated - Reset the call when leaving the patient - Glowing position light Assistance button - Yellow button with assistance symbol Push to call for assistance Flashing yellow light when operated Glowing po
Equipment and accessories Remote control functions Microphone * LBB 7077/31/32 only Nurse call * Generates a call request to the nursing staff * Position light * Confirmation light when operated Bed lamp switch * Toggle bed light ON and OFF * Optional bistable impulse relay LBB 7076/75 is needed Programme selection * Turns ON audio programmes * Steps through 10 audio programmes * Selected programme displayed as: 1, 2. ...
Equipment and accessories PATIENT REMOTE CONTROLS LBB 7077/33 Patient remote call & light LBB 7077/40 Presence, assistance & alarm terminal LBB 7077/30 Patient remote call - Frame and housing not included - Fits in standard U40 housing for on wall and flush mount LBB 7077/41 Presence & assistance terminal TERMINALS LBB 7077/31 Patient remote audio LBB 7077/35 Pull-cord terminal - Frame and housing not included - Fits in standard U40 housing for onwall and flush mount LBB 7077/71 PAN TV Interface LB
Equipment and accessories LBB 7077/42 Presence terminal LBB 7077/44 Call button terminal LBB 7077/50 Dual external alarm terminal - Frame and housing not included - Fits in standard U40 housing for on wall and flush mount Presence/Reset button - Green button with presence symbol - Push when present at patient - Steady green light when operated - Reset call when leaving the patient - Glowing position light - LBB 7077/43 Presence & alarm terminal LBB 7077/45 Patient remote terminal - Frame and housing
Equipment and accessories LBB 7076/61/62/63 Terminal housings - single, dual & triple LBB 7073/71 Flush mount frame, white LBB 7077/26 PAN lamp terminal, dual - White plastic frame for flush mounting of bedside stations - Fits LBB 7073/63/60 and /61 LBB 7077/25 PAN lamp terminal, single - Standard U40 format - For lush mounting of all PAN terminals in standard U40 boxes - Casings for on-wall mounting included - White coloured plastic - Two lamps without glass in dual white housing with frame and casing
Equipment and accessories LBB 7077/20 Dual lamp terminal, 4-wire LBB 7077/21 Dual lamp terminal, 4-wire with buzzer LBB 7077/22 Triple lamp terminal, 4-wire - Two lamps without glass in white dual housing with frame and casing for onwall mounting - DIN STANDARD: . Lamp marked A can be programmed to either White or Red . Lamp marked B can be programmed to either Red or Green - DUTCH STANDARD: . Lamp marked A can be programmed to Yellow .
Technical data Dimensions (wxhxd) in mm/inch: LBB 7089/97 Programme distribution station LBB 7077/10 Bedside station Terminals 224x93x70/ 8.8x3.7x2.8 224x93x70/ 8.8x3.7x2.8 73x73x20/ 2.9x2.9x0.8 83x83x28/ 3.3x3.3x1.1 Including on-wall frame LBB 7077/25: 83x83x48/ 3.3x3.3x1.9 155x83x48/ 6.1x3.3x1.9 225x83x48/ 8.9x3.3x1.9 225x83x48/ 8.9x3.3x1.9 LBB 7077/20/26: LBB 7077/21: LBB 7077/22: Flush mounted Weight, net in kg/lb: Including on-wall frame Lamp terminals 0.675/1.5 0.675/1.5 83x83x9/3.3x3.
Technical data LBB 7089/97 Programme distribution station Output power: Loudspeaker Cabling: Extension line Max. loop resistance Power line From PAN bus Max. loop resistance, IP code: LBB 7077/35 Terminals Lamp terminals 300 mW/1 W Rloop=450 ohm: Rloop=0 ohm: 25 mW 300 mW 7 mW Headset Headset: Impedance Plug LBB 7077/10 Bedside station 2x32 ohm 3.5 mm Stereo jack: 2-wire at 0.2 A: < 0.45 A: at 0.6 A: at 1.0 A: at 1.5 A: at 2.
Introduction M100 S-16/32 Intercom System The M100 S-16 Intercom system is designed to provide cost-effective, handsfree internal communication in any organization with the need for up to 32 extensions. A basic system for up to 16 stations is available in a start pack with or without display station comprising of the M100 S-16 Exchange equipped for four lines, three M100 S Master stations and all equipment for installation.
Function description The M100 S-16 Exchange provides as standard all the practical problem-solving solutions described below. Automatic transfer (patch option) Subscribers may instruct the system to transfer all incoming calls to any other station. during calls. The programme source is connected directly to the programme input socket of the M100 S-16. Two-way handsfree conversation Keying an extension number provides instant loudspeaking communication between two parties.
Exchange LBB 7111/00 S-16 Basic exchange The S-16 Basic exchange is housed in a cabinet for wall mounting. Two connectors are provided for connecting a program source and for connection of a data line when two S-16 exchanges are interconnected. The cabinet contains a mother board with the common exchange control circuitry, a termination board with screw terminals for connection of the line cabling, sockets for up to 8 line cards and an optional power distribution board if central powering is desired.
Star t packs LBB 7111/16 S-16 Start pack with 3 stations In order to facilitate the first step towards installing an intercom system a complete start pack has been designed which includes all you need in order to install a complete system with three compact master stations. If more stations are desired these can be added by choosing from the extensive range of M100 Intercom stations available.
Exchange accessories The M100 S-16 basic exchange can be equipped in different ways in order to further extend system flexibility. LBB 7111/50 Interconnection kit, two S-16 exchanges Contents of S-16 Display driver kit, LBB 7111/51: 1 x Display driver PCB LBB 7111/20 S-16 Line card for 2 stations 1 x LBB 7201/12 S-16 10 substations/ 2 masters display program Mounting material 1 x Interconnection flat cable with plugs Cables for interconnecting 2 x M100 S-16 exchanges.
Sof t ware The standard M100 S-16 has a comprehensive function range. In order to make the system more adaptable to special requirements alternative programs can be ordered. NB: These programs are delivered as PROM chips which have to be plugged into the exchange, replacing the standard program. LBB 7201/10 S-16 13 substations/ 2 masters program The basic M100 S-16 exchange caters for the connection of two substations. LBB 7201/10 program can be ordered to extend the number of substations to13.
Introduction M100 S-72 Exchange Family Range The system maintenance is provided via an optional user-friendly PC program for Windows supporting on-site programming of system parameters and station display texts. Dedicated PC programs are also available for Prison communication systems as well as for system surveillance and call monitoring in security applications. The programme distribution supports up to 10 programme channels.
Function description Intrinsic functions (SB, S and SO) Two-way handsfree conversation Keying an extension number provides instant loudspeaking communication between two parties. Two-way private conversation Most M100 S stations may be equipped with a handset to allow privacy or for ease of conversation in environments with high noise level. Simplex conversation Conversation may be manually controlled from any calling master station by «push-to-talk», «release-to-listen» operation of the SIMP button.
Function description Group hunt Subscribers may be programmed to be a member of a group hunt table. Calls to subscribers programmed in the group hunt table need acceptance of the receiving party. Calls not answered within a preset time will be forwarded to the next subscriber. Speech (optional by LBB 7103/48) Voice mail A subscriber may leave a spoken message to any other subscriber. The electronically stored message will be heard by the receiving party at any time.
Standard sof t ware function packages Intrinsic functions Two-way handsfree conversation Two-way private conversation Simplex operation Microphone blocking Wait-on-busy Automatic queuing Basic functions Call me (flashing lamp) Automatic recall Break in Three-way conferance Add-in conferance Follow me Group call All call Emergency call Loudspeaker connection Programme distribution channels Substation w/door opening Direct call Priority station Extended functions Transfer on busy Transfer always Group hunt Co
How to build a complete exchange In order to build a complete Intercom, Hospital or Prison communication system the following steps must be considered depending on the application: 1. Select exchange type Select any exchange by typenumber according to requirements for functions, number of stations and network: l SB-80 Basic function exchange for standard applications (page 43) l S-72 to S-384 Stand-alone exchange (page 44-45) l SO-72 to SO-768 ODIN network exchange (page 46-49) 2.
M100 SB-80 Basic function exchange LBB 7112/00 SB-80 Exchange Included in LBB 7112/00: l LBB 7102/93 S-64 Power Supply supporting all required internal voltages and line voltage for 80 extensions. 36 V/2 A is available for power distribution to kits and display stations.
M100 Stand-alone exchanges Technical data LBB 7112/01 S-72 Exchange LBB 7112/02 S-144 Exchange LBB 7112/03 S-216 Exchange 7112/01, S-72 7112/02, S-144 7112/03, S-216 90-190/180-264 90-190/180-264 325/410 485/610 442/17.40 310/12.20 a) 532/20.94 (12U) 20/44 19 Aluminium sub-frames 442/17.40 310/12.20 a) 798/31.
M100 S-72 Stand-alone exchanges LBB 7112/04 S-256 Exchange Technical data LBB 7112/05 S-320 Exchange 7112/04, S-256 Supply voltage, strappable (V a.c.): 90-190/180-264 Power consumption from mains, typical/max. (VA): 645/810 Dimensions in mm/in.: Width 577/22.72 Depth 574/22.60 Height 1875/73.82 (39U) Net weight (kg/lb) approx inclusive cabinet.
M100 SO-72 ODIN Net work exchanges Technical data LBB 7112/11 SO-72 Exchange LBB 7112/12 SO-144 Exchange LBB 7112/13 SO-216 Exchange 7112/11, SO-72 7112/12, SO-144 7112/13, SO-216 90-190/180-264 90-190/180-264 325/410 485/610 442/17.40 310/12.20 a) 666/26.22 (15U) 26/57.2 19 Aluminium sub-frames 442/17.40 310/12.20 a) 932/36.69 (21U) 36/79.
M100 SO-72 ODIN Net work exchanges Technical data LBB 7112/14 SO-256 Exchange LBB 7112/15 SO-320 Exchange LBB 7112/16 SO-384 Exchange 7112/14, SO-256 7112/15, SO-320 7112/16, SO-384 90-190/180-264 90-190/180-264 805/1010 965/1210 577/22.72 574/22.60 2141/84.29 (45U) 2 x 577/22.72 574/22.60 1342/52.
M100 SO-72 ODIN Net work exchanges Technical data LBB 7112/17 SO-448 Exchange LBB 7112/18 SO-512 Exchange LBB 7112/19 SO-576 Exchange 7112/17, SO-448 7112/18, SO-512 7112/19, SO-576 90-190/180-264 90-190/180-264 1285/1610 1445/1810 2 x 577/22.72 574/22.60 2 x 1875/73.82 (2 x 39U) 2 x 577/22.72 574/22.60 2 x 1875/73.
M100 SO-72 ODIN Net work exchanges LBB 7112/20 SO-640 Exchange Technical data LBB 7112/21 SO-704 Exchange 7112/20, SO-640 Supply voltage, strappable (V a.c.): 90-190/180-264 Power consumption from mains, typical/max. (VA): 1605/2010 Dimensions in mm/in.: Width 2 x 577/22.72 Depth 574/22.60 Height 2 x 1875/73.
Exchange expansion units and kits Expanding the exchange Any exchange within the M100 S range can be expanded by using expansion units and kits.
Exchange expansion units and kits Stand-alone and ODIN exchange expansion units S-72 S-144 SO-72 SO-144 S-144 S-216 SO-144 SO-216 + LBB 7112/08 LBB 7112/08 S-72 Sub exchange with 72 line extension capacity S-216 S-256 S-320 SO-216 SO-256 SO-320 SO-384 SO-448 SO-512 SO-576 SO-640 SO-704 + LBB 7112/09 S-256 S-320 S-384 SO-256 SO-320 SO-384 SO-448 SO-512 SO-576 SO-640 SO-704 SO-768 LBB 7112/09 S-64 Sub exchange with 64 line extension capacity Stand-alone and ODIN exchange upgrade kits SB-80 ODIN Functi
Exchange expansion units and kits S-72/SO-72 ODIN function upgrade kit STAND-ALONE EXHANGES ODIN EXCHANGES LBB 7112/32 S-216/S-256 Stand-alone exchange expansion kit SO-320/SO-384 ODIN exchange expansion kit 52
Line termination equipment, voice board and line cards LBB 7105/95 Line termination unit LBB 7105/98 Line termination panel LINE CARDS The LBB 7105/95 is fully equipped for termination of up to 80 4-wire extensions. VOICE BOARD LBB 7110/29 Line card, 6 stations/ 2 simplex relay loudspeakers 2-wires are terminated as intercom lines to the M100 S exchange and 2-wires support distribution of power for display stations and bedside stations as well as other applications requiring separate powering.
Data inter face and interconnection equipment LBB 7109/21 VDU terminal opto interface LBB 7102/87 +/- 12 V DC/DC converter LBB 7103/56 ACIA card The LBB 7102/87 is used in the SO-72 using the master computer frame when the system is connected to peripheral equipment requiring "true" 12 V swing on the serial interface. Used on a project basis.
Couplers LBB 7110/08 DTMF coupler, 4 lines *) LBB 7110/09 FSK coupler, 2 lines *) l Dialling and audio communication to/from M100 S exchanges l Dialling and audio communication to/from M100 P exchanges l Supports 4 lines l Supports 2 lines l DTMF format on signalling l FSK format on signalling LBB 7112/60 DP6000 coupler l Supports DP6000 display paging and meet me l Programming of receivers via PC program included in system maintenance PC program LBB 7110/48 DTMF telephone coupler, 2 li
Optical Digital Information Net work Optical Digital Information Network (ODIN) The ODIN system is designed for building intercom systems with capacity for more than 10 000 extensions as well as a distributed exchange structure. ODIN utilizes distribution of digital audio and data through 2 optical fibres that can be run up to 1.5 km without repeaters. When several systems are interconnected via ODIN controllers, the entire installation is used as one large system.
Optical Digital Information Net work LBB 7112/81 ODIN SO-72 node LBB 7103/82 Optical data driver, master LBB 7103/63 ODIN patch cable, 3 m l l Drives one ODIN node To be installed in the LBB 7112/80 ODIN controller Included in all SO exchanges: l Standard Codec capacity divided into: - 10 programme channels - 1 group call - 8 or 16 audio channels l Expandable to 16 audio channels by adding one LBB 7103/85 PCM codec board, 2-wire l LBB 7112/90 ODIN PC node LBB 7103/84 Optical data driver, slave l L
System cabinets Exchange Cabinet Configurations All exchanges ranging from LBB 7112/04 to /06 and from LBB 7112/14 to /22 are delivered with suitable cabinet 19 racks.
PC Programs LBB 7215/22 PC system maintenance program for Windows Machine Requirements The program is made for setting up and changing system parameters for SB-80, S-72 and SO-72 exchanges. The program requires one free comport and an OPTO interface card in order to communicate with the exchange.
Description LBB 7215/13 Basic call monitor program The LBB 7215/13 is necessary to display station call activity in the M100 S standalone and in ODIN configurations as text strings on the PC screen. The program is designed to work on IBMcompatible PC 386 SX or better with minimum 40 Mb hard disk capacity available.
Bi-Way Intercom System Introduction The Bi-Way system enables counter personnel to give their customers personal service while maintaining security and hygiene. The Philips Bi-Way system is designed to cater for one-to-one intercom communication between two parties. Typical applications are banking counters, post office counters, railway ticket counters, gates as well as applications in hospital environments where one-to-one communication is required.
Function description The standard Bi-Way position consists of the following elements: of special conditions which may occur during use. tion. Active simplex function is indicated by the corresponding LED. - MICROPHONE SELECTOR - "Microphone selector" button with lamp for switching to an optional goose-neck microphone fitted to the operator's unit. This enables handsfree communication even in periods of intense noise on the operator's side.
Star ter kit LBB 7026/70 Bi-Way microphone kit LBB 7026/65 Bi-Way starter kit Electret microphone with 5 m cable. Plastic microphone housing. 2 aluminium lists with self-adhesive tape. 1 alco-pad for cleaning screen. LBB 7026/65 Bi-Way starter kit consists of: - LBB 7026/60 Bi-Way operators unit - LBB 7026/70 Bi-Way microphone kit - LBB 7026/80 Bi-Way loudspeaker kit - LBB 7102/60 Power supply Dimensions (wxhxd): - Microphone housing in mm/inch: 18x9.5x13/0.7x0.4x0.
Optional accessories LBB 7073/82 Handset with cradle kit LBB 7026/81 Bi-Way flush mount loudspeaker kit LBB 7026/71 Bi-Way goose-neck microphone Optional handset for wall mounting in difficult noise conditions or for situations where confidentiality is required. Optional loudspeakers for flush mount applications in desk or wall. Height/diameter in mm/inch:58x160/2.3x6.3 Weigh tin kg/lb: 0.700/1.
Standard Requirement Specification T1 T2 T3 T4 T5 E Indoors in office & light industrial environments Indoors in light industrial & hospital environments Indoors in heavy duty industrial environments Normal outdoor environments such as gates, doors, etc. Heavy duty outdoor environments with special requirements Indoors in climate-controlled offices and light industrial environments 90-190 V a.c. 47-63 Hz NA NA NA NA NA X 180-264 V a.c.
IP Degree of Protection Protection for electrical apparatus against physical contact, foreign bodies and ingress of water. The degree of protection is stipulated by using the abbreviation IP (international protection) and two identification numbers according to the following table. Degree of protection (Protection against contact and ingress of solid foreign bodies) 0 1 2 3 4 5 6 1) 2) 3) No special protection.
Typenumber Survey Typenumber LBB 7026/60 LBB 7026/65 LBB 7026/70 LBB 7026/71 LBB 7026/72 LBB 7026/80 LBB 7026/81 LBB 7026/82 LBB 7026/83 LBB 7069/08 LBB 7069/18 LBB 7069/21 LBB 7069/62 LBB 7069/63 LBB 7069/64 LBB 7071/10 LBB 7071/71 LBB 7072/10 LBB 7072/32 LBB 7073/60 LBB 7073/61 LBB 7073/62 LBB 7073/63 LBB 7073/65 LBB 7073/66 LBB 7073/67 LBB 7073/68 LBB 7073/70 LBB 7073/71 LBB 7073/73 LBB 7073/74 LBB 7073/80 LBB 7073/82 LBB 7073/84 LBB 7076/26 LBB 7076/27 LBB 7076/28 LBB 7076/29 LBB 7076/37 LBB 7076/60 LBB
Typenumber Survey Typenumber LBB 7103/84 LBB 7103/85 LBB 7105/95 LBB 7105/97 LBB 7105/98 LBB 7108/10 LBB 7108/30 LBB 7108/40 LBB 7108/60 LBB 7109/21 LBB 7109/23 LBB 7109/24 LBB 7109/26 LBB 7110/08 LBB 7110/09 LBB 7110/29 LBB 7110/30 LBB 7110/39 LBB 7110/40 LBB 7110/45 LBB 7110/47 LBB 7110/48 LBB 7111/00 LBB 7111/16 LBB 7111/17 LBB 7111/18 LBB 7111/19 LBB 7111/20 LBB 7111/22 LBB 7111/32 LBB 7111/50 LBB 7111/51 LBB 7112/00 LBB 7112/01 LBB 7112/02 LBB 7112/03 LBB 7112/04 LBB 7112/05 LBB 7112/06 LBB 7112/08 LBB
Dokument1 18-05-98 20:50 Side 1
18-05-98 19:49 Data subject to change without notice. 3924 981 15511 09/97 © Philips Electronics N.V. 1997 08704-intercom-oms.qxd Side 1 All round expertise Philips leads the way with total solutions for communications and security applications. Dedicated expertise in access control, closed-circuit TV, congress, intercom, paging and public address means even the most demanding requirements can be met. Compability and flexibility are guaranteed by the integrated system approach.
