Installation manual

4-2010 6. Optional Internet/Email Interface Setup
3. Click Click here to start Network Setup.
4. Set up in-home computer access to the generator set.
5. Click Network Setup on the home page.
6. Click Click here to start Network Setup.
7. Continue to the Email Setup screen.
8. Select the Alert Level you would like to receive.
9. Enter your e-mail Server Name, User Name (inclusive of domain - for example.
[e-mail]) and Password. Typically, it will be necessary to contact the
customer's e-mail service provider.
NOTE: The email account must allow SMTP via port 25; verify with your ISP.
10. Continue to the Destination Email Addresses screen.
11. Enter up to three different email addresses to receive generator set alerts.
12. Press Done.
FIGURE 33. EMAIL ADDRESSES (PAGE 3)
6.4 Email Setup Parameters
6.4.1 Outgoing Server (SMTP) Settings
Ask your Internet Service Provider (ISP) and/or e-mail provider for the Server Name, User
Name and Password to enter.
NOTE: An Email account capable of SMTP authentication via port 25 is required. The
User Name must include the domain name. Example:
username@domainname
6.4.2 Email Addresses
You may enter up to three Email addresses to whom to send generator set status and event
messages.
A029V088 (Issue 2) 45