Installation manual

4-2010 3. Step-By-Step Outline of Installation
RSS 200-6869 X
NOTE: Model RSS 100-6634 and RSS 200-6635 transfer switches do not incorporate
a utility circuit breaker and therefore must be connected through a Service
Entrance Utility Panel incorporating the utility circuit breaker.
Perform Generator Set Configuration when ready to start up the generator set.
FIGURE 1. PARTIAL COVERAGE LOAD CONNECTIONS (TRANSFER SWITCH WITHOUT
CONTROLLER)
FIGURE 2. FULL COVERAGE LOAD CONNECTIONS (TRANSFER SWITCH WITHOUT
CONTROLLER, ONE CIRCUIT BREAKER)
A029V088 (Issue 2) 13