Product Manual

FIGURE 3. RELAY HARNESS
5. The B+ extension harness (see figure below) comes with a TB-DC terminal block. Snap the
block in above the relays.
FIGURE 4. B+ EXTENSION HARNESS
6. Screw in the pan head screw (A043E872) behind the box where the block gets mounted.
See Figure 1 and Figure 2. Torque to 8 - 9 Nm (5.92 - 6.66 ft-lb).
7. Refer to the wiring diagrams (shown below) to connect the relay harness and B+ extension
wires to the TB-DC block and PCC-TB1 connector.
A045H692 (Issue 1)
Page 9 of 11