Product Manual B

4. Operation - PowerCommand 1.13-2018

FIGURE 28. COLD START IDLE ACTIVE

5. The generator set provides voltage to the transfer switch. (However, the

transfer switch does not transfer in manual mode.)

Remote Starting the Generator Set Sequence

If the generator set is remote started with the in-home operator panel

accessory, if equipped (the generator set is in Auto Mode), the sequence is as

follows:

1. In a normal operation, the utility power is running to the transfer switch

and then to the building load, and the generator set is off.

2. The generator set-mounted control (HMI211) is set in Auto Mode.