Product Manual B

3. Control System 3-2018

Updating Exercise Frequency (3-Phase ATS)

NOTICE

Not applicable without an RA series transfer switch.

To update the exercise frequency and dates on the Clock/Exerciser Menu:

1. From any Information Menu, hold down the up and down arrows simultaneously

for two seconds. The Service Menu appears.

2. Access the Time Setup screen by selecting Clock Exerciser on the Genset

Service Menu.

3. Press the down key on the Time Setup screen to access the Daylight Saving

Adjust screen.

4. Select Adjust.

5. Press the down key on the Daylight Saving Adjust Start screen.

6. Select Adjust.

7. Press Exercise Schdr on the Daylight Saving Adjust End screen.

8. Press Adjust.

When updating these settings, the functions of the keys are as follows:

• The horizontal right arrow key is used to select successive blocks for editing

settings on the screen.

• Use the + or - keys to edit the following settings:

◦ Schdr Enable: Enable or Disable

◦ Exercise Schedule: Semi-Annual (every six months), Quarterly, Monthly,

Bi-Weekly (every two weeks) , or Weekly

◦ Exercise Schedule: Day, Hours, Minutes, AM/PM

• Press Save to save any changes. After saving, the Save button changes to the

Adjust button.