Product Manual A

6. Startup and Configuration PCC 2.3 7-2018

TABLE 18. HISTORY/ABOUT MENU

Name Description

Starts Total number of start attempts.

Runs Total number of generator set runs.

Engine Hours Total engine run time.

Control Hours Controller ON time in seconds. Upper limit is 136 years.

Kw Hours Generator set total net kWh accumulation.

Gen Mod # Number identifying the model of the generator set. (Password level: 2)

Gen Ser # Serial number identifying the generator set.

Nominal Voltage Generator set nominal Line-to-Line voltage.

Wye/Delta Delta or Wye for Generator set connection.

Rating Select Selects Standby/Prime/Base application rating.

Contr Type Used by the PC tool.

Firmware Ver Version of software loaded into the control. Obtained from

PowerCommand

2.3 Filename.

Calib Part The unique calibration part number loaded into the control.

Calib Date The revision date of the calibration part number loaded into the control.

ECM Code The calibration coded the ECM is sending.

HMI Firm Ver Parameter: HMI Local Parameter.

HMI Boot Ver Parameter: HMI Local Parameter.

50 Hz Load

Profile*

This shows how long the generator set has been running (50 Hz

operation) at various percentages of its rated load.

60 Hz Load

Profile*

This shows how long the generator set has been running (60 Hz

operation) at various percentages of its rated load.

* When using the Load Profile Graph table (for 50 Hz or 60 Hz), the upper line’s value

indicates 100% of table.