Product Manual A

6. Startup and Configuration PCC 2.3 7-2018
68 A051X873 (Issue 10)Copyright © 2018 Cummins Inc.
• Press the C Button to return to the previous menus. Settings will not
be saved when this button is pressed.
Operator Panel - Engine Data Operator Menu
The Engine Data Menu - Typical Data figure shows a block representation of a
typical Engine Data menu. To navigate from the Home menu (HOME [1/2]), press
the soft-key button below the function button indicating Engine. This will take you
directly to the Engine menu.
The Engine Data menu is displayed on one page.
Engine Data Menu
Use this menu to look at the status of the engine.
TABLE 17. ENGINE DATA MENU
Name Description Allowed Values
Pressure
Oil Monitor point for Oil Pressure 0 - ~993 kPa (0 - ~145 psi)
Boost Monitor point for Boost Absolute
Pressure
0 - ~1014 kPa (0 - ~148 psi)
Fuel Rail Monitor point for Fuel Outlet Pressure 0 - ~249364 kPa (0 - ~36404
psi)
Fuel Inlet Monitor point for Fuel Supply Pressure 0 - ~993 kPa (0 - ~145 psi)
Coolant Monitor point for Coolant Pressure 0 - ~993 kPa (0 - ~145 psi)
Crankcase Monitor point for Crankcase Pressure –244 - ~260 kPa (–35.67 - ~38
psi)
Ambient Monitor point for Barometric Absolute
Pressure
0 - ~253 kPa (0 - ~37 psi)
Temperature
Coolant Monitor point for Coolant Temperature N/A
Oil Monitor point for Oil Temperature –40 - ~210
o
C (–40 - ~410
o
F)
Manifold Monitor point for Intake Manifold
Temperature––
–40 - ~210
o
C (–40 - ~410
o
F)
Fuel Inlet Monitor point for Fuel Temperature –40 - ~210
o
C (–40 - ~410
o
F)
Aftercooler Monitor point for Aftercooler
Temperature
–40 - ~210
o
C (–40 - ~410
o
F)
Other
Engine Hrs Total engine run time
Engine Speed Monitor point for Average Engine Speed