Product Manual A

6. Startup and Configuration PCC 2.3 7-2018

Operator Panel - Initial Operator Menu

Figure 24 on page 67 shows the initial menu which is displayed over two pages.

Use the soft-key buttons below the up and down arrows (▲ and ▼) to toggle

between the two pages.

Use the soft-key buttons below Genset, Alternator, or Engine to short-cut to those

menus.

Pressing the Home button from any screen will return the display to the main

menu screens.

Initial Menu Data

This menu displays the information available through the menus.

TABLE 16. INITIAL DATA MENU

Name Description

History/About Use this screen to view historical information about your generator set.

Faults: If there are no active Faults, these screens will not be available.

Active Shutdowns Use this screen to view active Shutdown faults.

Active Warning Use this screen to view active Warning faults.

History Use this screen to view faults that have been

cleared.

Genset Data Use this screen to view the status of the generator set.

Alternator Data Use this screen to view the status of the alternator.

Engine Data Use this screen to view the status of the engine.

Advanced Status: ---

Genset Use this screen to view power, energy, phase

difference, and other detailed generator set

information.

Controller Use this screen to view sequences of operation,

configurable inputs and outputs, and other detailed

controller information.

Engine Use this screen to view pressures, voltages,

temperatures, and other detailed engine information.

Help Use this screen to obtain more information regarding the operator panel.