Product Manual A

5. Startup and Configuration PCC 1.1 7-2018

NOTICE

Adjusting the brightness on the operator panel adjusts the brightness of

both the LCD backlight and the LEDs on the display. The contrast should

never be 0 or 100% on any of the screens. The default value for Brightness is

50%.

5.4 History and About Menu

To access the History/About screen:

1. From any Information Menu, hold down the up and down arrows simultaneously

for two seconds. The Service Menu appears.

2. Select History/About.

3. Advance through the screens to view information about the generator set,

control, and display.

NOTICE

The following screens represent the standard operator panel (HMI211). If

using an in-home operator panel, which may be additionally purchased as an

option, the screens may look slightly different. This procedure applies to

both operator panels.