Product Manual A

5. Startup and Configuration PCC 1.17-2018

FIGURE 19. EXERCISE FREQUENCY NAVIGATION

Updating Exercise Duration (1-Phase ATS)

NOTICE

Not applicable without a single phase RA series transfer switch.

To update the exercise duration on the Clock/Exerciser Menu:

1. From any Information Menu, hold down the up and down arrows simultaneously

for two seconds. The Service Menu appears.

2. Access the Time Setup screen by selecting Clock Exerciser on the Genset

Service Menu.

3. Press the down key on the Time Setup screen to access the Daylight Saving

Adjust screen.

4. Select Adjust.

5. Press the down key on the Daylight Saving Adjust Start screen.

6. Select Adjust.

7. Press Exercise Schdr on the Daylight Saving Adjust End screen.

8. Press the down key on the Exercise Schdr Menu.

9. Press Adjust.

When updating these settings, the functions of the keys are as follows:

• The horizontal right arrow key is used to select the duration block for editing

exercise duration.

• Use the + or - keys to edit the exercise duration minutes.