Product Manual A

5. Startup and Configuration PCC 1.1 7-2018

FIGURE 17. DAYLIGHT SAVING ADJUST END SCREEN

5.2 Exercise Settings

NOTICE

When battery power is lost, these settings must be reset.

NOTICE

Not applicable without a single phase RA series transfer switch.

To access the Clock/Exerciser Menu:

1. From any Information Menu, hold down the up and down arrows simultaneously

for two seconds. The Service Menu appears.

2. Navigate through the screens to find and select Clock/Excr in the Service

Menu.

NOTICE

The following screens represent the standard operator panel (that is,

HMI211). If using an in-home operator panel, which may be additionally

purchased as an option, the screens may look slightly different. This

procedure applies to both operator panels.