Product Manual A

4. Installation7-2018

FIGURE 7. CIRCUIT BREAKER AC LOAD CONNECTIONS LOCATION (SYMBOLS

SHOWN AT BOTTOM)

6. Torque the circuit breaker terminals per specifications on the circuit breaker

label.

7. Torque the neutral lug to 31.1 Nm (275 in-lb).

8. Torque the equipment grounding lug to 13.8 Nm (120 in-lb).

9. Fill in the stub-up openings with an approved duct seal or mastic tape to keep

out insects and rodents.

10. Install the circuit breaker cover.