Product Manual B

2. Introduction3-2018

Type Specification

Oil Standards

• Must adhere to Cummins

Engineering Standard

(CES) 20085

• Use of improper oils can result in engine damage. Use

only the required oils:

◦ 5W-40 (all ambient temperatures)

◦ 15W-40 (above 4 °C [40 °F] ambient temperature)

(use of GEO 15W-40 oil in ambient temperatures

below 4 °C (40 °F] could result in engine

turbocharger damage)

• A sulfated ash limit of 0.6% mass has been placed on

all engine lubricating oils recommended for use in

Cummins® B, natural gas engines. Higher ash oils can

cause valve and/or piston damage, cause spark plug

fouling, and lead to excessive oil consumption and

degradation of the catalyst.

TABLE 5. LUBRICATING OIL SYSTEM SPECIFICATIONS

Type Specification

Lubricating Oil Pressure at Idle (Minimum) 104 kPa (15 psi)

Lubricating Oil Pressure at Rated Speed (Minimum)

Filter Bypass Valve-Opening Pressure 311 kPa (45 psi)

Pressure Regulator Valve-Opening Pressure 449 kPa (65 psi)

Lubricating Oil Capacity (Standard Sump):

--High 14.2 L (15 qt)

--Low 12.4 L (13 qt)

--Total System 15.1 L (16 qt)

TABLE 6. GENERATOR SET SIZE SPECIFICATIONS

Enclosure

Type

Size (L x W x H)

Open/Weather

2489 x 1016 x 1473 mm (98 x 40 x 58 in); does not include exhaust

discharge elbow

Sound Level 1 3023 x 1016 x 1473 mm (119 x 40 x 58 in)

Sound Level 2 3454 x 1016 x 1473 mm (136 x 40 x 58 in)